20100510, 19:04  #1 
May 2010
498_{10} Posts 
n=480K500K LLR discussion archive
All old discussions, status updates, and lresults file attachments are in this thread.
Original post:  I've attached the results for n=499995500000, k<100K. No primes were found. Gribozavr, could you post the sieve files for n=480000481000, k<10M? Last fiddled with by Oddball on 20100516 at 08:09 
20100510, 19:18  #2 
A Sunny Moo
Aug 2007
USA (GMT5)
79^{2} Posts 
Variable range LLR discussions + lresults files
Shouldn't the sieve effort for this range be completed first before starting LLR testing? I believe the latest range status was posted in post #27 of that thread after MooMoo disappeared. I don't recall the optimal sieving depth for the range but I do know it was nowhere near there when last worked on.
Otherwise, though, splitting up the range into k<100K and k=100K10M portions does sound like a good ideasince the project at this point is just getting back on its feet, it's nowhere near big enough to make a dent in the whole <10M range yet. Better, indeed, to tackle <100K first, and then worry about the rest later. As it is now, the sieve effort is split up by 5K nranges over the entire range of k's. I'm not familiar with how twin sieves scale over kranges, but if the project is primarily going to tackle k<100K to start with, it might be worthwhile to catch up all the sieve's nrange divisions to the same depth, then split it up instead into k<100K and k=100K10M portions, and work on the k<100K portion to get it up to optimal and ready for LLRing sooner. 
20100510, 20:36  #3  
May 2010
111110010_{2} Posts 
Quote:
*assuming a sieve depth of p=65T. I've also been using an older sieve file that someone emailed me. With a newer sieve file, it should take even longer to find a factor for k<100K since there are fewer candidates. 

20100510, 21:00  #4  
A Sunny Moo
Aug 2007
USA (GMT5)
79^{2} Posts 
Quote:
The tricky thing is that all four original nrange chunks are sieved to different depths, so k<100K over the entire n=480K500K range can't be considered sieved to p=65T. Nonetheless, it does seem quite optimally sieved for that range given actual test results, so I suppose that's not worth worrying about now. BTW, I'm assuming that at this point people are just taking their own range chunks right out of the original sieve filesit might be a good idea to start posting some presplit files in ranges sized to last a few days on a typical computer. That should help reduce the possibility of human error (since the original sieve file is split into 4 parts, one has to merge them back together and sort appropriately before pulling out a range). At the NPLB and CRUS projects, what we do is upload a few such presplit files to our web server, then post links in the appropriate forum threadssee here for an example. (Note that that example is almost out of available files as is; normally we'd have at least 5 there.) If you don't have web hosting space readily available to you that allows you to upload individual files, Sendspace might be a good optionthat way, as opposed to attaching them here in the forum, you're not limited to 1 per post. Last fiddled with by mdettweiler on 20100510 at 21:08 

20100510, 21:36  #5  
Account Deleted
"Tim Sorbera"
Aug 2006
San Antonio, TX USA
17·251 Posts 
Quote:
Here are the full details of my check: I ran a test with tpsieve at p=65T (a 1G range starting there) on 3 <= k <= 9999999, 485000 <= n <= 489999 and found 31 factors in 227.38 CPU seconds of sieving (this does not include the ~2 minute init time or however you might consider the ~gig of RAM it needed; I ran it on a single thread). That's 7.35 seconds per factor. I don't know if I happened to find more or less factors than was expected, but at 31 I'm sure the odds are impossibly low that chance would throw this from 1 factor every 7 seconds to 1 factor every 10 minutes. I also know that 3 <= k <= 9999999, 485000 <= n <= 489999 (k<10M, an n=5k range) is rather different from 3 <= k <= 99999, 480000 <= n <= 499999 (k<100k, full n range), but none of that can account for the ~82 times difference between our two measurements. Are you sure there wasn't something else going on slowing down your sieving? Were you using tpsieve? Did you have enough memory to do what you were trying, or was it trying to swap (were you out of memory so your OS was reverting to using your muchslower hard disk as a virtual memory location; a.k.a. thrashing) and so progressing many times slower than it would if it was all in memory? (If I'm not mistaken, it scales such that if you try to sieve the full k and n range at once with tpsieve, it would need about 4GB of RAM available to it to run properly; though I'm not sure of the effect of sieving k<100K over the whole n range) BTW I'm running a 32bit OS, so a 64bit OS could sieve faster. That said, from the data point given and the timings of various numbers, I calculated an optimal depth of around 2000T (ignoring the effects of a 64bit OS, etc.). Last fiddled with by MiniGeek on 20100510 at 21:40 

20100510, 21:50  #6  
A Sunny Moo
Aug 2007
USA (GMT5)
79^{2} Posts 
Quote:


20100510, 22:10  #7  
Account Deleted
"Tim Sorbera"
Aug 2006
San Antonio, TX USA
17·251 Posts 
Quote:
But surely that's not how it really works out to be most efficient. If we can remove one factor every 7.35 seconds (faster, even, with 64bit) by sieving more now, it must be more efficient to sieve than to run LLR on even the lowest candidates, which take about 220 seconds on my machine. Last fiddled with by MiniGeek on 20100510 at 22:13 

20100510, 22:51  #8  
A Sunny Moo
Aug 2007
USA (GMT5)
79^{2} Posts 
Quote:
So from that angle, you're right, it would be much more efficient to sieve more before starting LLR testing if the plan is to do the entire k<10M range any time soon. That has been the general indication so far, so yeah, it probably would be good to sieve more before doing LLR testing. And since there would still be plenty of LLR work available on the fixedn n=390K effort, it's not like the project would be starved for LLR work while this range is being sieved. (Of course, this doesn't even consider whether n=390K is sieved enough to do much LLR, but that's another question for another thread.) The final decision, of course, would be up to Oddballwho I see has now been officially confirmed as a moderator. Congratulations! 

20100510, 23:12  #9 
"Lennart"
Jun 2007
2^{5}·5·7 Posts 
Stop LLR Start sieving
I did a test on a i7 computer.
./tpsieve p161e12 P162e12 i480000484999.txt ftpsfactors_160T161T.txt 64bit Linux ~1 sec/factor This was on 1 core. Start sieving stop LLR Lennart 
20100510, 23:12  #10  
Account Deleted
"Tim Sorbera"
Aug 2006
San Antonio, TX USA
4267_{10} Posts 
Quote:
It wouldn't efficient for the project for Oddball to go ahead with LLR at the current sieve levels. Last fiddled with by MiniGeek on 20100510 at 23:18 

20100511, 01:44  #11 
May 2010
2·3·83 Posts 
I've decided to leave the LLR range reservations open for k<100000, but the reservations for 100K<k<10M are locked until we're close to reaching an optimal sieve depth.
Last fiddled with by Oddball on 20100511 at 01:52 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Team drive #10 k=14002000 n=500K1M  gd_barnes  No Prime Left Behind  61  20130130 16:08 
LLR reservation thread (n=480K500K)  Oddball  Twin Prime Search  33  20120120 05:37 
Subproject #2: 500k600k sequences to 100 digits  10metreh  Aliquot Sequences  690  20091014 09:02 
Sieving drive for k=10032000 n=500K1M  gd_barnes  No Prime Left Behind  160  20090510 00:50 
k=10051400 n=200K500K results fill in  gd_barnes  No Prime Left Behind  55  20090416 11:33 