20180227, 18:58  #1 
Feb 2018
5_{8} Posts 
Problem with prime 95 in worker #8
i have a problem with owrker 8
[Feb 27 19:03] Worker starting [Feb 27 19:03] Beginning a continuous selftest on your computer. [Feb 27 19:03] Please read stress.txt. Choose Test/Stop to end this test. [Feb 27 19:03] Test 1, 1800000 LucasLehmer iterations of M250519 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 19:05] Test 2, 1800000 LucasLehmer iterations of M245759 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 19:06] Test 3, 1800000 LucasLehmer iterations of M245281 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 19:08] Test 4, 1800000 LucasLehmer iterations of M243713 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 19:09] Selftest 12K passed! [Feb 27 19:09] Test 1, 3200000 LucasLehmer iterations of M172031 using FMA3 FFT length 8K, Pass1=128, Pass2=64, clm=2. [Feb 27 19:11] Test 2, 3200000 LucasLehmer iterations of M163839 using FMA3 FFT length 8K, Pass1=128, Pass2=64, clm=2. [Feb 27 19:13] Test 3, 3200000 LucasLehmer iterations of M159745 using FMA3 FFT length 8K, Pass1=128, Pass2=64, clm=2. [Feb 27 19:15] Selftest 8K passed! [Feb 27 19:15] Test 1, 1400000 LucasLehmer iterations of M315393 using FMA3 FFT length 15K, Pass1=320, Pass2=48, clm=2. [Feb 27 19:16] Test 2, 1400000 LucasLehmer iterations of M311295 using FMA3 FFT length 15K, Pass1=320, Pass2=48, clm=2. [Feb 27 19:17] FATAL ERROR: Rounding was 0.5, expected less than 0.4 [Feb 27 19:17] Hardware failure detected, consult stress.txt file. [Feb 27 19:17] Torture Test completed 8 tests in 13 minutes  1 errors, 0 warnings. [Feb 27 19:17] Worker stopped. you know what is my problem? I run the test because after a game into "assetto corsa" after one or two hours windows give an error, so some friends sudgest this test runned with the max hoit temperature (no ram test) the temperatures was max 69 degrees you can help me? I'm a beginner and i don't know what I cvan do now (I can't see the txt file where is it?) thx in advance and sorry for my poor english 
20180227, 20:02  #2 
"Curtis"
Feb 2005
Riverside, CA
4473_{10} Posts 
1. Reduce your overclock.
2. Clean your system of dust. 3. If one core is much hotter than the others, your CPU heatsink may not be installed well. 
20180227, 20:02  #3 
Feb 2018
5 Posts 
NOW Similar error in worker #7
[Feb 27 20:26] Worker starting [Feb 27 20:26] Beginning a continuous selftest on your computer. [Feb 27 20:26] Please read stress.txt. Choose Test/Stop to end this test. [Feb 27 20:26] Test 1, 1800000 LucasLehmer iterations of M250519 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 20:28] Test 2, 1800000 LucasLehmer iterations of M245759 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 20:29] Test 3, 1800000 LucasLehmer iterations of M245281 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 20:31] Test 4, 1800000 LucasLehmer iterations of M243713 using FMA3 FFT length 12K, Pass1=256, Pass2=48, clm=1. [Feb 27 20:32] Selftest 12K passed! [Feb 27 20:32] Test 1, 3200000 LucasLehmer iterations of M172031 using FMA3 FFT length 8K, Pass1=128, Pass2=64, clm=2. [Feb 27 20:34] Test 2, 3200000 LucasLehmer iterations of M163839 using FMA3 FFT length 8K, Pass1=128, Pass2=64, clm=2. [Feb 27 20:36] Test 3, 3200000 LucasLehmer iterations of M159745 using FMA3 FFT length 8K, Pass1=128, Pass2=64, clm=2. [Feb 27 20:38] Selftest 8K passed! [Feb 27 20:38] Test 1, 1400000 LucasLehmer iterations of M315393 using FMA3 FFT length 15K, Pass1=320, Pass2=48, clm=2. [Feb 27 20:40] Test 2, 1400000 LucasLehmer iterations of M311295 using FMA3 FFT length 15K, Pass1=320, Pass2=48, clm=2. [Feb 27 20:41] Test 3, 1400000 LucasLehmer iterations of M308295 using FMA3 FFT length 15K, Pass1=320, Pass2=48, clm=2. [Feb 27 20:43] Test 4, 1400000 LucasLehmer iterations of M307201 using FMA3 FFT length 15K, Pass1=320, Pass2=48, clm=2. [Feb 27 20:44] Selftest 15K passed! [Feb 27 20:44] Test 1, 2200000 LucasLehmer iterations of M212991 using FMA3 FFT length 10K, Pass1=128, Pass2=80, clm=2. [Feb 27 20:45] FATAL ERROR: Rounding was 0.5, expected less than 0.4 [Feb 27 20:45] Hardware failure detected, consult stress.txt file. [Feb 27 20:45] Torture Test completed 11 tests in 18 minutes  1 errors, 0 warnings. [Feb 27 20:45] Worker stopped. 
20180227, 20:11  #4  
Feb 2018
5 Posts 
Quote:
the pc is new with z270m motherboard no ovreclock two slot of ram the core temp prog. said: 62 to 68 degrees max difference the core tem was a good method for see temp? What you sudgest now? I buy from a online store and now I don't known what I can do :( the pc it is a mid case with gygabyte aours gtx 1080ti and and i7 7700k 4200 g skill ram c14 or c15 I don't remeber. only few months Last fiddled with by artesina on 20180227 at 20:18 

20180227, 20:29  #5 
Feb 2018
5 Posts 
the medium tst with some ram test is workers 7
[Feb 27 21:13] Worker starting [Feb 27 21:13] Beginning a continuous selftest on your computer. [Feb 27 21:13] Please read stress.txt. Choose Test/Stop to end this test. [Feb 27 21:13] Test 1, 36000 LucasLehmer iterations of M7998783 using FMA3 FFT length 400K, Pass1=320, Pass2=1280, clm=4. [Feb 27 21:16] Test 2, 36000 LucasLehmer iterations of M7798785 using FMA3 FFT length 400K, Pass1=320, Pass2=1280, clm=4. [Feb 27 21:19] Selftest 400K passed! [Feb 27 21:19] Test 1, 140000 LucasLehmer iterations of M2605473 using FMA3 FFT length 128K, Pass1=512, Pass2=256, clm=2. [Feb 27 21:19] FATAL ERROR: Rounding was 9185070.543, expected less than 0.4 [Feb 27 21:19] Hardware failure detected, consult stress.txt file. [Feb 27 21:19] Torture Test completed 2 tests in 5 minutes  1 errors, 0 warnings. [Feb 27 21:19] Worker stopped.  worker 8 [Feb 27 21:13] Worker starting [Feb 27 21:13] Beginning a continuous selftest on your computer. [Feb 27 21:13] Please read stress.txt. Choose Test/Stop to end this test. [Feb 27 21:13] Test 1, 36000 LucasLehmer iterations of M7998783 using FMA3 FFT length 400K, Pass1=320, Pass2=1280, clm=4. [Feb 27 21:16] Test 2, 36000 LucasLehmer iterations of M7798785 using FMA3 FFT length 400K, Pass1=320, Pass2=1280, clm=4. [Feb 27 21:19] Selftest 400K passed! [Feb 27 21:19] Test 1, 140000 LucasLehmer iterations of M2605473 using FMA3 FFT length 128K, Pass1=512, Pass2=256, clm=2. [Feb 27 21:20] Test 2, 140000 LucasLehmer iterations of M2584313 using FMA3 FFT length 128K, Pass1=512, Pass2=256, clm=2. [Feb 27 21:21] Test 3, 140000 LucasLehmer iterations of M2573917 using FMA3 FFT length 128K, Pass1=512, Pass2=256, clm=2. [Feb 27 21:22] Test 4, 140000 LucasLehmer iterations of M2540831 using FMA3 FFT length 128K, Pass1=512, Pass2=256, clm=2. [Feb 27 21:22] FATAL ERROR: Rounding was 0.5, expected less than 0.4 [Feb 27 21:22] Hardware failure detected, consult stress.txt file. [Feb 27 21:22] Torture Test completed 5 tests in 8 minutes  1 errors, 0 warnings. [Feb 27 21:22] Worker stopped. 
20180227, 20:51  #6 
Feb 2018
5 Posts 
AFTER TEST FAILURE THE CORE 3 ( WITH CORE TEMP) SHOW A BURDEN DOWN rduced at 13 % , OTHER CORES continuous to run at 100% BURDEN .
I SUPPOSE THE CORE tested DOESNT WORK AFTER THE erros previous attached. it is correct? thx 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Prime 95 will not let me change cores per worker  evanh  Software  4  20171222 22:25 
Worker #5 and Worker#7 not running (Error ILLEGAL SUMOUT  skrupian08  Information & Answers  9  20160823 16:35 
Cullen prime problem  Citrix  Prime Cullen Prime  22  20070223 10:46 
prime problem  Agrajag  Puzzles  20  20040609 09:34 
Problem running primenet on debian (woody) dual processor  thedagit  Software  3  20021019 05:57 