mersenneforum.org  

Go Back   mersenneforum.org > Great Internet Mersenne Prime Search > Hardware > GPU Computing > GpuOwl

Reply
 
Thread Tools
Old 2020-09-18, 23:42   #56
Xyzzy
 
Xyzzy's Avatar
 
Aug 2002

201658 Posts
Default

4096MB seems to be fine. You don't get that much faster with more memory. Especially if you stall the program!

Xyzzy is offline   Reply With Quote
Old 2020-09-19, 04:19   #57
petrw1
1976 Toyota Corona years forever!
 
petrw1's Avatar
 
"Wayne"
Nov 2006
Saskatchewan, Canada

10010100111012 Posts
Default YAY... and Thanks ... and FAST!!!

Its running and it's a lot faster than a CPU.

A 6.7566 GhzDay P-1 in under 30 minutes with a P100 GPU

This would take 1 core of my 7820X 18 hours.
All 8 cores of my CPU could do just over 10 per day; this GPU could do almost 50 per day.

Observation: I specified B1=1,500,000 B2=30,000,000
I got Stage 1=2,164,271; Stage 2=1,460,867 primes and 2,880 (classes???)

PS I added the commas for readability

Observation#2: If I leave off the ,2 at the end of this worktodo.txt line
B1=1500000,B2=30000000;PFactor=0,1,2,40371047,-1,74,2
I get the error

2020-09-19 04:21:44 colab 1 FFT: 128K 256:1:256 (0.00 bpw)
2020-09-19 04:21:44 colab FFT size too large for exponent (0.00 bits/word).
2020-09-19 04:21:44 colab Exiting because "FFT size too large"

Last fiddled with by petrw1 on 2020-09-19 at 04:27
petrw1 is offline   Reply With Quote
Old 2020-10-01, 23:39   #58
petrw1
1976 Toyota Corona years forever!
 
petrw1's Avatar
 
"Wayne"
Nov 2006
Saskatchewan, Canada

10010100111012 Posts
Default Why does it ignore worktodo lines?

2020-10-01 23:37:32 colab worktodo.txt line ignored: "B1=1500000,B2=30000000;PFactor=0,1,2,40382929,-1,74,2"


Thanks

Never mind, I got the new build which I understand no longer does P1 alone.

Last fiddled with by petrw1 on 2020-10-01 at 23:57
petrw1 is offline   Reply With Quote
Old 2020-10-02, 01:56   #59
moebius
 
moebius's Avatar
 
Jul 2009
Germany

10011011112 Posts
Default

Quote:
Originally Posted by petrw1 View Post
Never mind, I got the new build which I understand no longer does P1 alone.
https://mersenneforum.org/showpost.p...28&postcount=1
moebius is offline   Reply With Quote
Old 2020-10-02, 03:56   #60
kriesel
 
kriesel's Avatar
 
"TF79LL86GIMPS96gpu17"
Mar 2017
US midwest

5,779 Posts
Default

Quote:
Originally Posted by petrw1 View Post
2020-10-01 23:37:32 colab worktodo.txt line ignored: "B1=1500000,B2=30000000;PFactor=0,1,2,40382929,-1,74,2"

Thanks

Never mind, I got the new build which I understand no longer does P1 alone.
Gpuowl 7.0 is not ready yet, don't use it, per Mihai https://www.mersenneforum.org/showpo...0&postcount=44
kriesel is offline   Reply With Quote
Old 2021-09-27, 23:15   #61
kriesel
 
kriesel's Avatar
 
"TF79LL86GIMPS96gpu17"
Mar 2017
US midwest

5,779 Posts
Default

Quote:
Originally Posted by moebius View Post
Here is the executable for colab with the libstdc files
Tried that on a new colab account, got the following as entire output of the run attempt:
./gpuowl.exe: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by ./gpuowl.exe)


(edit: and I see others have hit that error too. Will try some of the posted resolution approaches at the next opportunities. If moebius or whoever were to post an updated archive file with the needed file included, that might help.)

Last fiddled with by kriesel on 2021-09-27 at 23:32
kriesel is offline   Reply With Quote
Old 2021-09-27, 23:28   #62
chalsall
If I May
 
chalsall's Avatar
 
"Chris Halsall"
Sep 2002
Barbados

61·163 Posts
Default

Quote:
Originally Posted by kriesel View Post
Tried that on a new colab account, got the following as entire output of the run attempt:
./gpuowl.exe: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by ./gpuowl.exe)
Quoting a thread almost exactly a year ago. Why?

I was drilling down to ensure I hadn't said anything stupid in my recent posts. I came across this example of someone well trained being able to reproduce excellence (once they understood the theory of operation).

We're all actually on the same side.

Correct?
chalsall is offline   Reply With Quote
Old 2021-09-28, 00:45   #63
Dr Sardonicus
 
Dr Sardonicus's Avatar
 
Feb 2017
Nowhere

52×199 Posts
Default

Quote:
Originally Posted by chalsall View Post
Quoting a thread almost exactly a year ago. Why?
From my reading, I would guess it's because (my emphasis)
Quote:
Originally Posted by kriesel View Post
Tried that [the executable for colab from the quoted post] on a new colab account, got the following as entire output of the run attempt:
./gpuowl.exe: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by ./gpuowl.exe)

Last fiddled with by Dr Sardonicus on 2021-09-28 at 00:51
Dr Sardonicus is offline   Reply With Quote
Old 2021-09-28, 04:14   #64
moebius
 
moebius's Avatar
 
Jul 2009
Germany

62310 Posts
Default

Quote:
Originally Posted by kriesel View Post
If moebius or whoever were to post an updated archive file with the needed file included, that might help.)
read this post, did You copy the libstdc files to your working directory? I can make a new binary, if you tell me the path to the old repository
https://mersenneforum.org/showpost.p...7&postcount=33

Last fiddled with by moebius on 2021-09-28 at 04:20
moebius is offline   Reply With Quote
Old 2021-09-28, 15:06   #65
kriesel
 
kriesel's Avatar
 
"TF79LL86GIMPS96gpu17"
Mar 2017
US midwest

5,779 Posts
Default

Quote:
Originally Posted by moebius View Post
did You copy the libstdc files to your working directory?
yes. libstd... missing is not the issue, libcxx version is in that case.

I tried 3 different Linux for Colab versions and hit different issues in each, finally got Fan Ming's going, although it blocks mprime on the CPU due to excessive CPU usage in gpuowl. I think that is ~V6.11-329 based on dates. It does not give a version when it runs. Purpose of the exercise was to not only get that account going, but document what's needed to clone to other accounts' Google drives without building anew on each, or at every new launch that gets a different Colab VM.

From my "building with msys2" notes, to get an old gpuowl commit, find the hash corresponding to the version desired, by matching the leading digits of the hash to the trailing digits of the gpuowl version.
For V6.11-380-g79ea0cc that's 79ea0cc29184237b24018e9396df271ec2754e97. https://github.com/preda/gpuowl/comm...df271ec2754e97

Then do similar to
Code:
git clone --branch v6 https://github.com/preda/gpuowl
cd gpuowl  
git checkout 79ea0cc29184237b24018e9396df271ec2754e97
or perhaps git reset --hard 79ea0cc29184237b24018e9396df271ec2754e97
There's more on my 3 attempts with downloaded builds in the second half of https://www.mersenneforum.org/showpo...0&postcount=7; use browser search for "build anew" to find the start of the relevant section.

Last fiddled with by kriesel on 2021-09-28 at 15:06
kriesel is offline   Reply With Quote
Old 2021-09-28, 21:17   #66
moebius
 
moebius's Avatar
 
Jul 2009
Germany

7·89 Posts
Default

GLIBCXX_3.4.26 comes with GCC 9.1.0. The gpuOwl 6.11.380 binary at https://mersenneforum.org/showpost.p...1&postcount=40 does not work for you, because the gcc version is not the same. I compiled it with gcc 9.1.0 https://gcc.gnu.org/onlinedocs/libst...anual/abi.html
It should work if you install gcc 9.1.0 and then copy the needed files with a notebook https://mersenneforum.org/showpost.p...7&postcount=33
Sure it isn't the same issue like in this thread? https://mersenneforum.org/showthread...511#post555511

Last fiddled with by moebius on 2021-09-28 at 21:43
moebius is offline   Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
gpuowl tuning M344587487 GpuOwl 14 2018-12-29 08:11
How to interface gpuOwl with PrimeNet preda PrimeNet 2 2017-10-07 21:32
runtime question yoyo YAFU 1 2015-01-08 07:07
runtime error when using redc ltd GMP-ECM 5 2009-10-30 13:09
ECM Runtime and F20 D. B. Staple Factoring 11 2007-12-12 16:52

All times are UTC. The time now is 14:05.


Mon Oct 18 14:05:09 UTC 2021 up 87 days, 8:34, 0 users, load averages: 1.31, 1.38, 1.37

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.

This forum has received and complied with 0 (zero) government requests for information.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.
A copy of the license is included in the FAQ.