20160114, 14:23  #1 
I moo ablest echo power!
May 2013
6CD_{16} Posts 
Compiling YAFU under MinGW
I'm trying to build the latest and greatest YAFU under MinGW64. I can actually get it to build with and without NFS=1 flag (by compiling MSieve without GPU poly search). However, when I go to run tune() as a test on it, I get a crash immediately following the relationgathering step for the C60 number.
To confirm that it's not the relationgathering step, I can delete siqs.dat and watch the relations get built again. So it's the step immediately after. I've tried the following build steps (with make clean before each): Code:
make x86_64 USE_SSE41=1 NFS=1 make x86_64 NFS=1 make x86_64 USE_SSE41=1 make x86_64 Code:
Unhandled exception at 0x0000000076F7FFC2 (ntdll.dll) in yafux64.exe: 0xC0000374: A heap has been corrupted (parameters: 0x0000000076FF7470). 
20160114, 15:07  #2 
"Ben"
Feb 2007
110100101011_{2} Posts 
Can you post the screen output when running with v, so I can see where it crashes exactly?

20160114, 16:24  #3 
I moo ablest echo power!
May 2013
1,741 Posts 
I can when I get home, absolutely. I'm going to try and build it here on my laptop at work since I have a little free time today. If I get the same error, I'll post the screenshot of that.

20160115, 01:31  #4 
I moo ablest echo power!
May 2013
1,741 Posts 
It's not a screenshot, but here's the full text:
Code:
$ yafux64.exe "tune()" v v 01/14/16 19:30:18 v1.34.5 @ BENPC, System/Build Info: Using GMPECM, Powered by GMP detected Intel(R) Core(TM) i74930K CPU @ 3.40GHz detected L1 = 32768 bytes, L2 = 12582912 bytes, CL = 64 bytes measured cpu frequency ~= 3362.986750 using 1 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> Setting THREADS = 1 for tuning starting SIQS on c60: 349594255864176572614071853194924838158088864370890996447417 fb bounds: 85% small: 1024 SPV: 36 10bit: 104 11bit: 168 12bit: 296 13bit: 520 32k div 3: 688 14bit: 968 15bit: 1736 med: 2544 large: 3488 all: 3488 start primes SPV: 251 10bit: 1039 11bit: 2153 12bit: 4201 13bit: 8147 32k div 3: 11003 14bit: 16433 15bit: 32803 med: 49277 large: 70009 ==== sieve params ==== n = 61 digits, 201 bits factor base: 3488 primes (max prime = 70009) single large prime cutoff: 3850495 (55 * pmax) allocating 2 large prime slices of factor base buckets hold 2048 elements using SSE4.1 enabled 32k sieve core sieve interval: 4 blocks of size 32768 polynomial A has ~ 7 factors using multiplier of 7 using SPV correction of 20 bits, starting at offset 36 using SSE2 for x64 sieve scanning using SSE2 for resieving 1316 bit primes using SSE2 for 8x trial divison to 13 bits using SSE4.1 and inline ASM for small prime sieving using SSE2 for poly updating up to 15 bits using SSE4.1 for medium prime poly updating using SSE4.1 and inline ASM for large prime poly updating trial factoring cutoff at 68 bits ==== sieving in progress (1 thread): 3552 relations needed ==== ==== Press ctrlc to abort and save state ==== 996 rels found: 700 full + 296 from 6611 partial, (5387.61 rels/sec) Max specified relations found sieve time = 0.0000, relation time = 0.0000, poly_time = 0.0000 trial division touched 114375 sieve locations out of 1593573376 sieving required 6079 total polynomials trial division touched 114375 sieve locations out of 1593573376 Edit to add: If I run siqs() on the number, the crash occurs after the linear algebra step: Code:
sieving required 0 total polynomials trial division touched 0 sieve locations out of 0 QS elapsed time = 0.0400 seconds. ==== post processing stage (msieve1.38) ==== begin with 18896 relations reduce to 5518 relations in 2 passes attempting to read 5518 relations recovered 5518 relations recovered 4324 polynomials freed 2 duplicate relations attempting to build 3804 cycles found 3804 cycles in 1 passes distribution of cycle lengths: length 1 : 1830 length 2 : 1974 largest cycle: 2 relations matrix is 3488 x 3804 (0.5 MB) with weight 98453 (25.88/col) sparse part has weight 98453 (25.88/col) filtering completed in 4 passes matrix is 3232 x 3296 (0.4 MB) with weight 82450 (25.02/col) sparse part has weight 82450 (25.02/col) commencing Lanczos iteration memory use: 0.6 MB lanczos halted after 52 iterations (dim = 3226) recovered 61 nontrivial dependencies Lanczos elapsed time = 0.0700 seconds. Sqrt elapsed time = 0.0050 seconds. SIQS elapsed time = 0.1150 seconds. Last fiddled with by wombatman on 20160115 at 01:34 
20160115, 15:39  #5 
I moo ablest echo power!
May 2013
3315_{8} Posts 
To add something that might help, the binary from sourceforge goes through tune() without issue on the same computer.
I also took a whack at compiling YAFU via VS2012, but the project kept incorporating the AVX2 code, even without the appropriate flag. Can you (or someone else) advise on how I might stop that from happening? 
20160115, 17:16  #6 
"Ben"
Feb 2007
3,371 Posts 
The latest SVN is likely a mess for compiling on anything other than linux. That is my bad. I abuse SVN by checking in code that doesn't necessarily work everywhere, because I thought I was the only person that used the head revision in SVN. MSVC builds in particular have been broken for a while now.

20160115, 17:45  #7 
I moo ablest echo power!
May 2013
1,741 Posts 
No problem. It builds without error under MinGWI can do, for instance, ecm factoring and the like without any issue. I haven't tried an nfs(), but I'll do that and report back. Maybe I can at least narrow down what's going on for you.
Edit: nfs() on a small (91 digits) number works fine all the way through. And to confirm that it's siqs() related, I ran the same number through thereit crashed after building and processing the matrix: Code:
largest cycle: 17 relations matrix is 74160 x 74841 (18.5 MB) with weight 4256736 (56.88/col) sparse part has weight 4256736 (56.88/col) filtering completed in 3 passes matrix is 67465 x 67529 (16.8 MB) with weight 3861614 (57.18/col) sparse part has weight 3861614 (57.18/col) saving the first 48 matrix rows for later matrix is 67417 x 67529 (14.5 MB) with weight 3347595 (49.57/col) sparse part has weight 3112970 (46.10/col) matrix includes 64 packed rows using block size 27011 for processor cache size 12288 kB commencing Lanczos iteration memory use: 11.6 MB lanczos halted after 1067 iterations (dim = 67415) recovered 17 nontrivial dependencies Lanczos elapsed time = 12.1930 seconds. Sqrt elapsed time = 0.0680 seconds. SIQS elapsed time = 303.6504 seconds. Last edit for now: The crash occurs at free_siqs(thread_data[0].sconf); in siqs.c (as confirmed by strategically placed printf() lines). So it looks like something with the pthread library. I'll futz around more with itgood task for a sick day. Last fiddled with by wombatman on 20160115 at 18:44 
20160116, 20:43  #8 
I moo ablest echo power!
May 2013
1741_{10} Posts 
Ok! Figured out where the crash is along with a crude bandage that seems to work for now.
The offending line is Line 2782 of SIQS.c in the free_siqs() function: Code:
free(sconf>modsqrt_array); I'll leave it to those of you who are far smarter than I am as to what actually causes the error and what a proper fix that is not simply sweeping it under the rug would be. 
20160116, 23:23  #9 
"Ben"
Feb 2007
110100101011_{2} Posts 
Nice work finding a workaround, albeit nonideal. I will see if I can find out what's going on.

20160121, 18:17  #10  
Banned
"Luigi"
Aug 2002
Team Italia
12C2_{16} Posts 
Quote:


20160121, 19:48  #11 
I moo ablest echo power!
May 2013
3315_{8} Posts 
I'm not, no. Or, at least, not on purpose. I don't recall seeing any std flag during compilation.

Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Compiling YAFU for Windows using mingw  bsquared  YAFU  59  20200821 16:31 
Running YAFU via Aliqueit doesn't find yafu.ini  EdH  YAFU  8  20180314 17:22 
Guide to compiling YAFU  Mr. Odd  YAFU  4  20170424 15:40 
Need help compiling YAFU from SVN.  Stargate38  YAFU  14  20160120 21:46 
Better with MinGW 5.0.3?  M0CZY  GMPECM  1  20060716 07:29 