GPU72 proxy ignores work type changes

Bdot · 2013-04-01, 22:33

Hi, I recently changed in prime95 the worktypes of my 3 worker threads from P-1, DC, DC to P-1, P-1, P-1. Now the last DC of thread#2 was about to be finished and to my surprise, GPU72 handed out another DC.

On GPU72, the computer is listed as 3 threads, P-1 worktype (not sure how it would list it if the threads had different ones). On primenet, thread#2 and #3 are still listed as P-1.

How can I switch the work type on the GPU72 proxy?

chalsall · 2013-04-01, 22:56

Quote:

Originally Posted by Bdot

Hi, I recently changed in prime95 the worktypes of my 3 worker threads from P-1, DC, DC to P-1, P-1, P-1. Now the last DC of thread#2 was about to be finished and to my surprise, GPU72 handed out another DC.

On GPU72, the computer is listed as 3 threads, P-1 worktype (not sure how it would list it if the threads had different ones). On primenet, thread#2 and #3 are still listed as P-1.

How can I switch the work type on the GPU72 proxy?

Could you please PM me the machine's name, and/or CID?

All proxy messages are logged for analysis. To deal with situations like this.

There is a known bug with Prime95/mprime not correctly reporting its desired worktype before requesting work. This might be the case here. On the other hand, maybe I made a mistake.

petrw1 · 2013-09-21, 04:04

... PM'd

chalsall · 2013-09-21, 17:50

Quote:

Originally Posted by petrw1

... PM'd

Received.

kladner · 2013-12-18, 06:27

After a smooth switch from P-1 to DC on all eight cores, I decided to switch one core back. This happened without problems. Now I have tried to change more cores to P-1, and they stubbornly remain DC. I have messed with the Worker Windows settings, both as a group at once, and one at a time. I have switched to LL, saved, then switched back to P-1. I have run repeated Manual Communications. When I set Send New Date, it will update/remove DC's I have unreserved on GPU72, if I have Days of Work set to 1. When I up DoW to 5, more DC's are acquired. I have been through Prime Net settings, changing back and forth. This includes not only the Preferred Work page, but also navigating 'My Account > CPU's > [computer name] and messing with the individual Core/Work Thread settings.

I am baffled. Perhaps sleeping on it will let the various systems get synchronized. Nonetheless, Chris, I will PM the name to you.

kladner · 2013-12-18, 13:15

For the moment, I have resorted to manual Get Work from GPU72 for P-1, for two workers. I arrange a worktodo.add the way I want it, and load up enough assignments to stay well ahead of the Days of Work to Queue value. The P-1's are going to workers 5 and 6 (which are also set to P-1 in Worker Windows), while the rest are set to DC.

The pessimist in me expects that the DC workers will now decide to change over to P-1 when their current assignments complete.

petrw1 · 2013-12-18, 14:36

Quote:

Originally Posted by kladner

For the moment, I have resorted to manual Get Work from GPU72 for P-1, for two workers. I arrange a worktodo.add the way I want it, and load up enough assignments to stay well ahead of the Days of Work to Queue value. The P-1's are going to workers 5 and 6 (which are also set to P-1 in Worker Windows), while the rest are set to DC.

The pessimist in me expects that the DC workers will now decide to change over to P-1 when their current assignments complete.

With a little advice from Chris and a lot of trial I have determined good things come in 3's. This should work....it does for me:
If you want worker#1 changed to DC for example:
1. Change it to anything else and "Send new end dates"
2. Repeat step 1
3. Change it to DC and "Send..." once more.
Has to be right on the 3rd change.

You may get unwanted assigns from steps 1 and 2 you can release.

kladner · 2013-12-18, 22:21

Thanks, petrw1! I'll give it a shot.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some LL tests obtained through proxy don't show up in GPU72 assignments	Chuck	GPU to 72	5	2014-02-28 19:11
New work types for GPU72?	chalsall	GPU to 72	72	2013-10-03 20:21
Type of work I'm doing	Unregistered	Information & Answers	17	2013-06-22 04:49
Best type of work for my cpu	Unregistered	Information & Answers	11	2013-05-17 05:22
Type of work to get?	ZFR	Information & Answers	7	2011-09-17 08:43

2013-04-01, 22:33	#1
Bdot Nov 2010 Germany 3×199 Posts	GPU72 proxy ignores work type changes Hi, I recently changed in prime95 the worktypes of my 3 worker threads from P-1, DC, DC to P-1, P-1, P-1. Now the last DC of thread#2 was about to be finished and to my surprise, GPU72 handed out another DC. On GPU72, the computer is listed as 3 threads, P-1 worktype (not sure how it would list it if the threads had different ones). On primenet, thread#2 and #3 are still listed as P-1. How can I switch the work type on the GPU72 proxy?

2013-09-21, 04:04	#3
petrw1 1976 Toyota Corona years forever! "Wayne" Nov 2006 Saskatchewan, Canada 10771₈ Posts	Me too.... ... PM'd Last fiddled with by petrw1 on 2013-09-21 at 04:05

2013-12-18, 06:27	#5
kladner "Kieren" Jul 2011 In My Own Galaxy! 2×3×1,693 Posts	After a smooth switch from P-1 to DC on all eight cores, I decided to switch one core back. This happened without problems. Now I have tried to change more cores to P-1, and they stubbornly remain DC. I have messed with the Worker Windows settings, both as a group at once, and one at a time. I have switched to LL, saved, then switched back to P-1. I have run repeated Manual Communications. When I set Send New Date, it will update/remove DC's I have unreserved on GPU72, if I have Days of Work set to 1. When I up DoW to 5, more DC's are acquired. I have been through Prime Net settings, changing back and forth. This includes not only the Preferred Work page, but also navigating 'My Account > CPU's > [computer name] and messing with the individual Core/Work Thread settings. I am baffled. Perhaps sleeping on it will let the various systems get synchronized. Nonetheless, Chris, I will PM the name to you.

2013-12-18, 13:15	#6
kladner "Kieren" Jul 2011 In My Own Galaxy! 2×3×1,693 Posts	For the moment, I have resorted to manual Get Work from GPU72 for P-1, for two workers. I arrange a worktodo.add the way I want it, and load up enough assignments to stay well ahead of the Days of Work to Queue value. The P-1's are going to workers 5 and 6 (which are also set to P-1 in Worker Windows), while the rest are set to DC. The pessimist in me expects that the DC workers will now decide to change over to P-1 when their current assignments complete.

2013-12-18, 22:21	#8
kladner "Kieren" Jul 2011 In My Own Galaxy! 2·3·1,693 Posts	Thanks, petrw1! I'll give it a shot.