View Single Post
Old 2013-01-27, 00:25   #5
Unregistered
 

2×7×479 Posts
Default Here's a strange one...

I have been running P95 as a stress test on a new PC and it was running just fine, no errors, all was good. At 47 minutes of run time all of the cores finished test 9 and the message "Self-test complete 720K- PASSED" posted for ALL 8 cores. Then a few seconds later core #7 listed a strange message when the cores were all preparing to run the next test: "Torture test completed 32 tests in 47 minutes - 0 errors, 100 warnings". Then seconds later core #5 which had also stated "Passed", listed the almost exact same message: "Torture test completed 32 tests in 48 minutes - 0 errors, 100 warnings".

The test is still running on the other 6 cores without issue. Below is a copy of the test and as you can see, there are NO Errors listed until AFTER the 18:47 timeminute mark when the software indicated all tests passed and it prepared to start a new test.

Please advise as this looks like a software issue, not a hardware issue??? The errors occured after the test had completed and was preparing to run again, not while actually testing.

The PC is a Asrock mobo, with AMD Fx-8350 CPU. It runs flawlessly in the OCCT test for hours on end. The RAM has passed over 96 hours of memtest with no errors. The PC is 100% stable in all tests including P95 until the software attempts to start a new test after ~47 minutes.

Code:
[Jan 26 18:00] Worker starting
[Jan 26 18:00] Setting affinity to run worker on logical CPU #7
[Jan 26 18:00] Beginning a continuous self-test to check your computer.
[Jan 26 18:00] Please read stress.txt.  Choose Test/Stop to end this test.
[Jan 26 18:00] Test 1, 6500 Lucas-Lehmer iterations of M12451841 using AMD K10 type-2 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:02] Test 2, 6500 Lucas-Lehmer iterations of M12451839 using AMD K10 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:03] Test 3, 6500 Lucas-Lehmer iterations of M12196481 using AMD K10 type-2 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:05] Test 4, 6500 Lucas-Lehmer iterations of M11796481 using AMD K10 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:06] Test 5, 6500 Lucas-Lehmer iterations of M11796479 using AMD K10 type-2 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:08] Test 6, 6500 Lucas-Lehmer iterations of M11596479 using AMD K10 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:09] Test 7, 6500 Lucas-Lehmer iterations of M11285761 using AMD K10 type-2 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:11] Test 8, 6500 Lucas-Lehmer iterations of M10885759 using AMD K10 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:12] Test 9, 6500 Lucas-Lehmer iterations of M10485761 using AMD K10 type-2 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:14] Test 10, 6500 Lucas-Lehmer iterations of M10485759 using AMD K10 FFT length 640K, Pass1=640, Pass2=1K.
[Jan 26 18:15] Self-test 640K passed!
[Jan 26 18:15] Test 1, 800000 Lucas-Lehmer iterations of M172031 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:17] Test 2, 800000 Lucas-Lehmer iterations of M163839 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:18] Test 3, 800000 Lucas-Lehmer iterations of M159745 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:19] Test 4, 800000 Lucas-Lehmer iterations of M157695 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:21] Test 5, 800000 Lucas-Lehmer iterations of M155649 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:22] Test 6, 800000 Lucas-Lehmer iterations of M153599 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:23] Test 7, 800000 Lucas-Lehmer iterations of M147455 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:25] Test 8, 800000 Lucas-Lehmer iterations of M143361 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:26] Test 9, 800000 Lucas-Lehmer iterations of M141311 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:27] Test 10, 800000 Lucas-Lehmer iterations of M135169 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:29] Test 11, 800000 Lucas-Lehmer iterations of M172031 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:30] Test 12, 800000 Lucas-Lehmer iterations of M163839 using AMD K10 type-1 FFT length 8K, Pass1=32, Pass2=256.
[Jan 26 18:31] Self-test 8K passed!
[Jan 26 18:31] Test 1, 5300 Lucas-Lehmer iterations of M14155777 using AMD K10 type-2 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:33] Test 2, 5300 Lucas-Lehmer iterations of M14155775 using AMD K10 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:34] Test 3, 5300 Lucas-Lehmer iterations of M13969343 using AMD K10 type-2 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:36] Test 4, 5300 Lucas-Lehmer iterations of M13669345 using AMD K10 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:37] Test 5, 5300 Lucas-Lehmer iterations of M13369345 using AMD K10 type-2 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:39] Test 6, 5300 Lucas-Lehmer iterations of M13369343 using AMD K10 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:40] Test 7, 5300 Lucas-Lehmer iterations of M13069345 using AMD K10 type-2 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:42] Test 8, 5300 Lucas-Lehmer iterations of M12969343 using AMD K10 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:43] Test 9, 6500 Lucas-Lehmer iterations of M12451841 using AMD K10 type-2 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:45] Test 10, 6500 Lucas-Lehmer iterations of M12451839 using AMD K10 FFT length 720K, Pass1=320, Pass2=2304.
[Jan 26 18:47] Self-test 720K passed!
[Jan 26 18:47] Test 1, 460000 Lucas-Lehmer iterations of M250519 using AMD K10 type-0 FFT length 12K, Pass1=48, Pass2=256.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
[Jan 26 18:47] ERROR: ILLEGAL SUMOUT
[Jan 26 18:47] Possible hardware failure, consult readme.txt file, restarting test.
snip duplicate error messages as forum won't allow over 10,000 words.

Code:
[Jan 26 18:47] Maximum number of warnings exceeded.
[Jan 26 18:47] Torture Test completed 32 tests in 47 minutes - 0 errors, 100 warnings.
[Jan 26 18:47] Worker stopped.
Core #5 test results are identical other than 1 minute later. Neither core would continue testing after the false error messages.
  Reply With Quote