mersenneforum.org

mersenneforum.org (https://www.mersenneforum.org/index.php)
-   Software (https://www.mersenneforum.org/forumdisplay.php?f=10)
-   -   Prime95 v30.4/30.5/30.6 (https://www.mersenneforum.org/showthread.php?t=26376)

tha 2021-02-08 20:13

I am still using build 6.

A few times since I installed 30.4 the process got killed, but very infrequent. Restarting mprime than solves the problem.

I now have reached a point where mprime gets killed every time it is restarted.

I have left terminal open so I could run some tests if desired.

Should I just install build 9 or run some kind of test to see what causes this crashing?

[CODE]

[Work thread Feb 8 20:19]
[Work thread Feb 8 20:19] P-1 on M15435689 with B1=1200000, B2=TBD
[Work thread Feb 8 20:19] Setting affinity to run helper thread 1 on CPU core #2
[Work thread Feb 8 20:19] Using FMA3 FFT length 800K, Pass1=320, Pass2=2560, clm=4, 4 threads
[Work thread Feb 8 20:19] Setting affinity to run helper thread 2 on CPU core #3
[Work thread Feb 8 20:19] Setting affinity to run helper thread 3 on CPU core #4
[Comm thread Feb 8 20:19] PrimeNet success code with additional info:
[Comm thread Feb 8 20:19] CPU credit is 4.2008 GHz-days.
[Comm thread Feb 8 20:19] Done communicating with server.
[Work thread Feb 8 20:31] M15435689 stage 1 is 57.73% complete. Time: 768.708 sec.
[Work thread Feb 8 20:42] M15435689 stage 1 complete. 3464242 transforms. Time: 1396.240 sec.
[Work thread Feb 8 20:42] With trial factoring done to 2^69, optimal B2 is 71*B1 = 85200000.
[Work thread Feb 8 20:42] If no prior P-1, chance of a new factor is 7.73%
[Work thread Feb 8 20:42] D: 840, relative primes: 1713, stage 2 primes: 4861699, pair%=92.99
[Work thread Feb 8 20:42] Using 11073MB of memory.
[Work thread Feb 8 20:42] Stage 2 init complete. 16975 transforms. Time: 14.521 sec.
Killed
henk@Z170:~/mersenne$ ./mprime -m
[Main thread Feb 8 21:01] Mersenne number primality test program version 30.4
[Main thread Feb 8 21:01] Optimizing for CPU architecture: Core i3/i5/i7, L2 cache size: 4x256 KB, L3 cache size: 8 MB
Main Menu

1. Test/Primenet
2. Test/Workers
3. Test/Status
4. Test/Continue
5. Test/Exit
6. Advanced/Test
7. Advanced/Time
8. Advanced/P-1
9. Advanced/ECM
10. Advanced/Manual Communication
11. Advanced/Unreserve Exponent
12. Advanced/Quit Gimps
13. Options/CPU
14. Options/Resource Limits
15. Options/Preferences
16. Options/Torture Test
17. Options/Benchmark
18. Help/About
19. Help/About PrimeNet Server
Your choice: 4

[Main thread Feb 8 21:01] Starting worker.
[Work thread Feb 8 21:01] Worker starting
[Work thread Feb 8 21:01] Setting affinity to run worker on CPU core #1
[Work thread Feb 8 21:01]
[Work thread Feb 8 21:01] P-1 on M15435689 with B1=1200000, B2=TBD
[Work thread Feb 8 21:01] Setting affinity to run helper thread 1 on CPU core #2
[Work thread Feb 8 21:01] Setting affinity to run helper thread 3 on CPU core #4
[Work thread Feb 8 21:01] Using FMA3 FFT length 800K, Pass1=320, Pass2=2560, clm=4, 4 threads
[Work thread Feb 8 21:01] Setting affinity to run helper thread 2 on CPU core #3
[Work thread Feb 8 21:01] Resuming P-1 in stage 2 with B2=85200000
[Work thread Feb 8 21:01] Using 11073MB of memory.
Killed
henk@Z170:~/mersenne$ ./mprime -m
[Main thread Feb 8 21:02] Mersenne number primality test program version 30.4
[Main thread Feb 8 21:02] Optimizing for CPU architecture: Core i3/i5/i7, L2 cache size: 4x256 KB, L3 cache size: 8 MB
Main Menu

1. Test/Primenet
2. Test/Workers
3. Test/Status
4. Test/Continue
5. Test/Exit
6. Advanced/Test
7. Advanced/Time
8. Advanced/P-1
9. Advanced/ECM
10. Advanced/Manual Communication
11. Advanced/Unreserve Exponent
12. Advanced/Quit Gimps
13. Options/CPU
14. Options/Resource Limits
15. Options/Preferences
16. Options/Torture Test
17. Options/Benchmark
18. Help/About
19. Help/About PrimeNet Server
Your choice: 4


Starting worker.
[Work thread Feb 8 21:02] Worker starting
[Work thread Feb 8 21:02] Setting affinity to run worker on CPU core #1
[Work thread Feb 8 21:02]
[Work thread Feb 8 21:02] P-1 on M15435689 with B1=1200000, B2=TBD
[Work thread Feb 8 21:02] Setting affinity to run helper thread 1 on CPU core #2
[Work thread Feb 8 21:02] Setting affinity to run helper thread 2 on CPU core #3
[Work thread Feb 8 21:02] Setting affinity to run helper thread 3 on CPU core #4
[Work thread Feb 8 21:02] Using FMA3 FFT length 800K, Pass1=320, Pass2=2560, clm=4, 4 threads
[Work thread Feb 8 21:02] Resuming P-1 in stage 2 with B2=85200000
[Work thread Feb 8 21:02] Using 11073MB of memory.
Killed
henk@Z170:~/mersenne$ ./mprime -m
[Main thread Feb 8 21:03] Mersenne number primality test program version 30.4
[Main thread Feb 8 21:03] Optimizing for CPU architecture: Core i3/i5/i7, L2 cache size: 4x256 KB, L3 cache size: 8 MB
Main Menu

1. Test/Primenet
2. Test/Workers
3. Test/Status
4. Test/Continue
5. Test/Exit
6. Advanced/Test
7. Advanced/Time
8. Advanced/P-1
9. Advanced/ECM
10. Advanced/Manual Communication
11. Advanced/Unreserve Exponent
12. Advanced/Quit Gimps
13. Options/CPU
14. Options/Resource Limits
15. Options/Preferences
16. Options/Torture Test
17. Options/Benchmark
18. Help/About
19. Help/About PrimeNet Server
Your choice: 4


[Work thread Feb 8 21:03] Worker starting
[Work thread Feb 8 21:03] Setting affinity to run worker on CPU core #1
[Work thread Feb 8 21:03]
[Work thread Feb 8 21:03] P-1 on M15435689 with B1=1200000, B2=TBD
[Work thread Feb 8 21:03] Setting affinity to run helper thread 1 on CPU core #2
[Work thread Feb 8 21:03] Using FMA3 FFT length 800K, Pass1=320, Pass2=2560, clm=4, 4 threads
[Work thread Feb 8 21:03] Setting affinity to run helper thread 2 on CPU core #3
[Work thread Feb 8 21:03] Setting affinity to run helper thread 3 on CPU core #4
[Work thread Feb 8 21:03] Resuming P-1 in stage 2 with B2=85200000
[Work thread Feb 8 21:03] Using 11073MB of memory.
Killed
henk@Z170:~/mersenne$

[/CODE]

PhilF 2021-02-08 20:58

I'm not sure how much memory you have installed in that machine, but it looks to me like you should try lowering the amount of memory that P-1 testing is allowed to use.

OTOH, post #97 indicates the problem you are seeing might be fixed in build 9, so if I were you I would just go ahead update and worry about it only if it isn't fixed.

Prime95 2021-02-08 21:35

[QUOTE=kriesel;571154](Re an F20 issue:)Does the prime95 v30.4 b9/b8 differential only affect Fermats? What if anything in the b9 update relates to Mersennes?.[/QUOTE]

It affects Fermats and Mersennes, P-1 and ECM.

[QUOTE=tha;571172].
I now have reached a point where mprime gets killed every time it is restarted.

Should I just install build 9 or run some kind of test to see what causes this crashing?[/QUOTE]

Try build 9. If that fails, send me the save file, worktodo.txt, prime.txt, and local.txt.

tha 2021-02-08 22:10

[QUOTE=Prime95;571179]
Try build 9. [/QUOTE]

Worked!

tha 2021-02-09 08:17

In mprime -m if the menu is displayed and an option is chosen the menu will again be displayed first which does not add any value and only clutters things. Can the redisplay of the menu be removed?

Runtime Error 2021-02-12 16:05

Maybe an error?
 
I accidentally duplicated the same P-1 test line in my worktodo.txt file twice. It ran the first test and found a factor! But then it ran the second test (starting in the second stage) and failed to find a factor. Ran using mprime v30.4b8. My expectation is that it should find the same factor again, right? Thank you!!!

Exponent: [M]102597787[/M]

[CODE][Wed Feb 10 22:14:47 2021]
{"status":"F", "exponent":102597787, "worktype":"P-1", "factors":["1023696064449201832067818657"], "b1":1200000, "b2":67200000, "fft-length":5898240, "security-code":"5A5F339B", "program":{"name":"Prime95", "version":"30.4", "build":8, "port":8}, "timestamp":"2021-02-11 03:14:47", "user":"XXXXX"}

[Thu Feb 11 07:45:49 2021]
{"status":"NF", "exponent":102597787, "worktype":"P-1", "b1":1200000, "b2":120000000, "fft-length":5898240, "security-code":"5975DD9B", "program":{"name":"Prime95", "version":"30.4", "build":8, "port":8}, "timestamp":"2021-02-11 12:45:49", "user":"XXXXX"}
[/CODE]

[CODE][Wed Feb 10 17:14:19 2021]
M102597787 stage 1 is 57.73% complete.
[Wed Feb 10 19:45:56 2021]
M102597787 stage 2 is 41.43% complete.
[Wed Feb 10 21:27:04 2021]
M102597787 stage 2 is 82.68% complete.
[Wed Feb 10 22:14:47 2021]
P-1 found a factor in stage #2, B1=1200000, B2=67200000.
UID: XXXXXX, M102597787 has a factor: 1023696064449201832067818657 (P-1, B1=1200000, B2=67200000)

< snip >

[Thu Feb 11 06:08:11 2021]
M102597787 stage 2 is 51.34% complete.
[Thu Feb 11 07:45:49 2021]
UID: XXXXXX, M102597787 completed P-1, B1=1200000, B2=120000000, Wi8: 5975DD9B
[/CODE]

Dropbox link for backup files:
[url]https://www.dropbox.com/sh/4iabn36d88zj9mm/AADhDrXXMg_5ybEg5SZWD-Esa?dl=0[/url]

Prime95 2021-02-23 06:07

[QUOTE=Runtime Error;571431]I accidentally duplicated the same P-1 test line in my worktodo.txt file twice. It ran the first test and found a factor! My expectation is that it should find the same factor again, right? [/QUOTE]

Maybe not. I believe when the first P-1 finished it created a save file indicating that P-1 had been run to B1=1.2M, B2=67.2M. When the second P-1 line was processed prime95 took B2 from 67.2M to 120M and thus did not find a factor.

LaurV 2021-02-23 07:19

Doing that with gpuOwl will drop the second line (so, do no test, found no factor, save the time). That's because if a factor is found, the tool checks the rest of the worktodo and discards other tests for the same exponent which are scheduled further, to avoid doing the long PRP (if both P-1 and PRP scheduled) for an exponent which already has a factor. Doesn't P95 behave the same?

Prime95 2021-02-23 17:50

[QUOTE=LaurV;572298]Doing that with gpuOwl will drop the second line (so, do no test, found no factor, save the time). That's because if a factor is found, the tool checks the rest of the worktodo and discards other tests for the same exponent which are scheduled further, to avoid doing the long PRP (if both P-1 and PRP scheduled) for an exponent which already has a factor. Doesn't P95 behave the same?[/QUOTE]

Prime95 does not do that.

Runtime Error 2021-02-24 00:18

[QUOTE=Prime95;572296]Maybe not. I believe when the first P-1 finished it created a save file indicating that P-1 had been run to B1=1.2M, B2=67.2M. When the second P-1 line was processed prime95 took B2 from 67.2M to 120M and thus did not find a factor.[/QUOTE]

Interesting, thank you!

Prime95 2021-03-13 01:53

Build 30.5 build 1 is available. It fixes the PRP problem described here: [url]https://www.mersenneforum.org/showthread.php?p=573197#post573197[/url]


All times are UTC. The time now is 22:48.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.